Automatic Injectable Dry Powder Filling with Rubber Stoppering Machine

Automatic Injectable Dry Powder Filling Machine

NKPF 250D Automatic Injectable Dry Powder Filling with Rubber Stoppering Machine

Machine Specification

Model No. NKPF - 250D

Direction Left to Right

Production Rate Up to 240 Fills /Min. for single dose.
Up to 120 Fills /Min. for double dose.
Up to 80 Fills /Min. for triple dose.
Up to 60 Fills /Min. for four dose.

Fill Capacity 50 Mg to 1.5 Grms. single dose (with change
parts).1.5 Grms. to 6 Grms. double, triple and four
dose. Fill range depending upon vial opening
and bulk density of powder.

Accuracy ±1% depending upon consistency and the
uniformity of bulk density of injectable powder
under controlled level of Humidity (i.e. 25%).

Electrical Supply 3.0 HP

Power Requirement 415 Volts, 3 Phase (4 Wire System), 50 Hz.

Height of Conveyor Adjustable from 900 to 950 MM

Dimensions 3760 MM (L) x 1000 MM (W) x 1740 MM (H)

Net Weight 1050 Kgs. (Approx)

Gross Weight 1550 Kgs. (Approx)

Fill sizes 50 mg. to 6 grms

Vial Sizes 5 ml. to 30 ml.

Rubber Stopper Sizes 20 mm

Model No.	NKPF - 250D
Direction	Left to Right
Production Rate	Up to 240 Fills /Min. for single dose. Up to 120 Fills /Min. for double dose. Up to 80 Fills /Min. for triple dose. Up to 60 Fills /Min. for four dose.
Fill Capacity	50 Mg to 1.5 Grms. single dose (with change parts).1.5 Grms. to 6 Grms. double, triple and four dose. Fill range depending upon vial opening and bulk density of powder.
Accuracy	±1% depending upon consistency and the uniformity of bulk density of injectable powder under controlled level of Humidity (i.e. 25%).
Electrical Supply	3.0 HP
Power Requirement	415 Volts, 3 Phase (4 Wire System), 50 Hz.
Height of Conveyor	Adjustable from 900 to 950 MM
Dimensions	3760 MM (L) x 1000 MM (W) x 1740 MM (H)
Net Weight	1050 Kgs. (Approx)
Gross Weight	1550 Kgs. (Approx)
Fill sizes	50 mg. to 6 grms
Vial Sizes	5 ml. to 30 ml.
Rubber Stopper Sizes	20 mm

Automatic Injectable Dry Powder Filling With Rubber Stoppering Machine

The NKPF-250 D, a variant of automatic injectable dry powder filling machine with rubber stoppering, boasts of improved performance and high production rates. It performs very precise operations having an accuracy of ±1%. This accuracy is dependent on the consistency and the uniformity of bulk density of injectable powder under controlled humidity level.

The production rate of NKPF-250D dry powder filling machine shows an increased value as compared to some of the other variants. The powder filler has a rate of 240 fills/min for single dose and 120 fills/min for a double dose. For a triple dose, the machine is capable of doing 80 fills/min whereas for four dose, it is 60 fills/min. The conveyor height can be adjusted from 900 to 950 mm and the vial sizes ranging from 5 ml to 30 ml can be incorporated with the powder filling machine.